Cremat offers fully-assembled shaping
amplifier instruments, made from Cremat parts.
This permits the
user to buy a shaping amplifier
instrument without the need to assemble or to solder
together parts sold in a kit format. Cremat's new line
of instruments are ready to be used "out of the box".
There are seven different completed instruments
available, differing only in the model of shaping
amplifier module
used. For example, the CR-200-500ns-INST assembled
shaping amplifier
instrument uses the CR-200-500ns shaping amplifier module. The
seven completed instrument models available are the CR-200-100ns-INST,
CR-200-250ns-INST, CR-200-500ns-INST, CR-200-1us-INST,
CR-200-2us-INST, CR-200-4us-INST, and CR-200-8us-INST.
Each assembled instrument consists of a
Cremat CR-200 series shaping amplifier module mounted on a CR-160 evaluation board, inside
a CR-160-BOX housing. Connectors have been assembled onto
the CR-150 board allowing for the user to connect the
+/-12V power supply, as well as the input and output.
All Cremat's
instruments have the same
outer dimensions: 4.6 inches (width) x 3.6 inches
(depth) x 2.2 inches (height). More information can be
found in the specification sheet.
