The CR-160-BOX is a painted die-cast
aluminum housing intended for use with the
CR-160
evaluation test board. Holes have been positioned on the
CR-160-BOX in locations associated with BNC connector
positions (input and output) and banana connector
positions (-12V, GND, +12V) on the CR-160 board. There
is also a small hole to gain access to the fine gain
adjustment potentiometer on the CR-160 board. Adjustment
to the potentiometer can be made using a small
screwdriver.
The CR-160-BOX comes with a lid and screws.
The CR-160-BOX has
outer dimensions of 4.7 inches (width) x 3.7 inches
(depth) x 2.3 inches (height).
The CR-160 evaluation
board and shaping amplifier modules are sold
separately.
